MwT（MicroWave Technology），是射频/微波和无线应用的商业，国防和太空产品的设计，制造和营销领域公认的领导者。

MwT（MicroWave Technology）提供全球MMIC，分立半导体器件，GaAs，GaN功率放大器，低噪声pHEMT器件，无线放大器，混合产品，医疗应用前置放大器（MRI线圈）和连接器放大器。

MicroWave Technology，Inc。（MwT）位于加利福尼亚州的硅谷，由技术负责人于1982年成立，在砷化镓（GaAs）器件设计和制造方面拥有丰富经验。工厂占地35,000平方英尺，公司的主要资产包括其GaAs半导体工厂和混合芯片和有线微波集成电路（HMIC）制造工厂。垂直制造和产品强度为微波元件市场提供了MwT（MicroWave技术）不凡的灵活性和机会。

今天，MwT（MicroWave Technology）是美国领先的离散砷化镓二极管和晶体管（FET，pHEMT和Gunn二极管）商业制造商。早期专注于器件可靠性的工作导致了专有的金属化系统，这使得MwT（MicroWave Technology）的器件不受氢污染的影响，现在是高可靠性行业非常关注的一个项目。

这些器件采用专有的外延材料和四分之一微米凹陷栅极工艺技术，可实现高线性度（1W P-1dB无线放大器中+ 48dBm IP3）和低相位噪声（17.5GHz DRO中的-125dBc @ 100 KHz偏移）功率输出范围从10毫瓦到5瓦的设备。这些器件以芯片或封装形式出售，在无线基础设施系统，工业射频应用以及各种国防和空间电子设备的信息传输或接收中，广泛用于10 MHz至40 GHz信号的放大。

通过利用MwT（MicroWave Technology）的GaAs FET的低互调失真特性，公司在其针对多载波和/的小型内部匹配模块化表面贴装发射和接收放大器模块产品线中享有越来越高的声誉。或数字调制（高线性）无线基础设施和军事通信系统。主要应用是接收器前端和蜂窝，PCS和WLL基站以及军事高可靠性通信中的驱动器或微微蜂窝输出放大器。值得注意的新产品具有极低的输入和输出回波损耗，可在高度关键的高线性度功率放大器级联中轻松实现增益插入。 MwT（MicroWave Technology）为内部和外部客户提供高可靠性的薄膜电路处理能力。 MwT（MicroWave Technology）采用薄膜混合微电路结构，生产和销售各种标准模块化放大器产品至26 GHz。这些模块也是MwT（MicroWave Technology）的构建元件，用于设计和制造标准以及用于国防和电信应用的定制连接器放大器。

MwT（MicroWave Technology）拥有多年的客户特色经验，并拥有庞大的基于MwT（MicroWave Technology）设备的定制设计库。 MwT（MicroWave Technology）使用其标准和定制版本的零件来生产专用放大器和板级产品。我们经验丰富的经验和业绩记录可以帮助您节省设计成本，时间和工程资源。示例包括低频LNA，无线LNA增强放大器，集成构建模块，高频振荡器，评估板和测试夹具。

MwT (MicroWave Technology), recognized leader in design, manufacturing, & marketing for commercial, defense, & space products for RF/Microwave and wireless application.

MwT (MicroWave Technology) supplies worldwide MMICs, discrete semiconductor devices, GaAs, GaN power amplifiers, low noise pHEMT parts, wireless amplifiers, hybrid products, pre-amplifiers for medical application (MRI coils), and connectorized amplifiers.

Located in California’s Silicon Valley, MicroWave Technology, Inc. (MwT) was founded in 1982 by technical principals with broad experience in Gallium Arsenide (GaAs) device design and fabrication. With a factory occupying 35,000 square foot, the Company’s principal assets include both its GaAs semiconductor fab and a hybrid chip and wire microwave integrated circuit (HMIC) manufacturing facility. The vertical manufacturing and product strength provide MwT (MicroWave Technology) uncommon flexibility and opportunity in the microwave component marketplace.

Today MwT (MicroWave Technology) is a leading U.S. based merchant manufacturer of discrete Gallium Arsenide diodes and transistors (FETs, pHEMTs, and Gunn Diodes). Early work focusing on device reliability resulted in proprietary metallization systems which make MwT (MicroWave Technology)’s devices impervious to hydrogen contamination, now an item of great concern to the high-reliability industry.

These devices employ proprietary epi material and quarter micron recessed gate process technology, which result in highly linear (+48dBm IP3 in a 1W P-1dB Wireless Amp) and low phase noise (-125dBc @ 100 KHz Offset in a 17.5GHz DRO) de-vices with power outputs ranging from 10 milliwatts to 5 watts. These devices, sold as chips or in packages, find wide use in the amplification of signals from 10 MHz to 40 GHz in the transmission or reception of information in wireless infrastructure systems, industrial RF applications, and in various defense and space electronics.

By taking advantage of the low intermodulation distortion characteristics of MwT (MicroWave Technology)’s GaAs FETs, the Company has enjoyed a growing reputation for its product line of small internally matched modular surface mount transmit and receive amplifier modules aimed at multi-carrier and/or digitally modulated (high linearity) wireless infrastructure and military communication systems. Principal applications are as receiver front ends and as driver or picocell output amplifiers in cellular, PCS and WLL base station and military high reliability communication. Noteworthy new products have extremely low input and output return loss providing ease of gain insertion in highly critical high linearity power amplifier cascades. MwT (MicroWave Technology) offers its high-reliability proven thin film circuit processing capability to both internal and external customer’s usage. Employing thin film hybrid microcircuit construction, MwT (MicroWave Technology) produces and markets various standard modular amplifier products to 26 GHz. These modules are also building elements for MwT (MicroWave Technology) to de-sign and manufacture standard as well as custom connectorized amplifiers for defense and telecommunication applications.

MwT (MicroWave Technology) has many years of experience of doing customer specials and has a vast library of custom designs based on MwT (MicroWave Technology) devices. MwT (MicroWave Technology) uses both its standard and custom versions of its parts to produce specialized amplifiers and board level products. Our proven experience and track record can help you save design cost, time, and engineering resource. Examples include low frequency LNA, Wireless LNA booster amplifier, Integrated building blocks, high frequency oscillators, evaluation boards and test fixtures.